Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and may even be fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However when you have double pane windows that are anchored by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this situation it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you're planning to attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor and could be trampled.

It's a good idea to tape the gap once the glass has been removed. This will stop drafts and water from getting into your property until a professional arrives to repair the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the gap between the window and the door is large, you might need to consider an alarm system that has an opening. This will provide the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may be affected by a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window which is sagging. First, you'll need to open the windows so you can reach the frame. Then, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit, tighten the screws until they remain in place.

If you can't reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. It is crucial to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have loosened over time, but it can be due to the handle mechanism wears out. Fortunately, it's easy to repair the loose uPVC window repair near me handle yourself. First, you'll need to shut the window and then perform a test fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is essential to take action if you wake up every morning to discover mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how severe the problem is, the old caulking may have to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and can reduce the efficiency of your energy.

It is important to check that the drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with a breeze it could be hinges that are at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like all mechanical parts hinges will wear out over time. It is very easy to replace a hinge on a window, but it's simpler if you have someone to help hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem can be caused by opening the window improperly or a faulty installation in the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to offer suggestions.

It is also essential to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also reduce the possibility of a window sticking and help prevent corrosion. Ideally, you should do this once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges may also become misaligned due to wear, causing gaps where the sash meets frame. They can be fixed by giving them a thorough clean, however in the event that they are beyond repair it might be necessary to get them aligned or replaced. Second, the interlock can also become misaligned. This happens on the hinge's side, and could require to be cleaned. In some instances, it may be necessary to replace the hinges.

The next common cause of draughts is the window seals, these are prone to wear or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures, and also reduce draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They can help block out cold air and keep your home warm and cosy!

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it is cheaper to replace them rather than repair them. If you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional as soon as possible.