Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. They do not get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC doors and windows regularly. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace and typically fit into frames of the past easily. However, if you have double glazed window repairs-pane windows that are anchored by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this case you'll need to locate some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

If you plan to try to remove the window panes yourself it is important to wear appropriate safety gear such as gloves that are thick and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass so that any shards will fall on the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block water and drafts from entering the home until a professional comes out and fix the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the distance between the window and the door is significant, you may want to use a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. Over time, they can be affected by a variety of issues such as sagging. A sagging window in uPVC can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from becoming worse.

To fix a sagging window you can try to reposition the hinges. To do this, you'll have to open the window to get to the frame. Then, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and test it for an appropriate fit. If you're satisfied with the fit of the window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to loosen. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows are waterproof and draught-proof.

uPVC handles can also loosen up. Most often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to close your window and do an initial test fit. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

It is crucial to act if you awake each day to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on how severe the problem is, the old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

Check that any drainage holes have no debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to note that if the leakage is coming from between the glass of your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with ease It could be hinges that are at the fault. These are easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. It is essentially a very simple process, but it's easier with someone else to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain way or by inadequate installation at the factory. This issue can be fixed by sending us a picture via our website and we will be happy to give you suggestions.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the possibility of a window repairs getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. Firstly the hinges, again due to wear and tear could become misaligned. This can cause an opening to appear between the sash and the frame. If they are beyond repair, it may be required to realign them. Second, the interlock can be disaligned. This is located on the hinge side and may need to be cleaned. In certain instances it might be necessary to replace these.

The second most frequent reason for draughts is window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures and lessen the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They will help stop cold air from entering and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and eventually, they will reach a point where it is more economical to replace them than fix them. If you encounter any issues with your Upvc window, it's best to consult a professional as soon as possible.