How to Find a Fiat 500 Spare Key

Fiat's classic 500 has become an iconic car since its relaunch in 2007. The company has now launched an additional attack against different engines by launching a hybrid version.

The replacement of the key fob batteries on the fiat panda key fob 500 are simple and inexpensive. It takes around 10 days for the key to be delivered from the Fiat main dealer.

Diagnosis of a Fault

The key fob has an electronic chip that communicates with the fiat car keys cut immobiliser system. This ensures that only cars with a valid license can start the car. If the transponder inside the key fob is damaged the chip will not be in a position to connect to the immobiliser. This means your vehicle will not start.

The good news is that it's possible to repair a broken key fob provided that the chip isn't physically damaged. A professional locksmith will use dealer-standard technologies to repair it quickly.

It is possible to utilize an OBD scanner to determine whether your device is in communication with the receiver module. This is a simple procedure, and it can provide an initial indication of where the issue is. If the OBD scan tool shows that communication between the transmitter and receiver modules is not happening It may be necessary to replace the fob's transmitter. This could be a costly alternative, and is best left to an expert locksmith.

Dead Coin Battery

The most common cause of a key fob not working is a dead battery. This is an easy fix that only takes a few minutes. Check that the key fob can be recognized by your vehicle. Then, try pressing the "Lock" or "Unlock" button to determine if the key fob responds.

If the key fob is not in range, it might not be responsive at all, or might only work intermittently. This could be a sign of a defective circuit. In this case, you'll need to consult the owner's manual to find out instructions on how to reprogram the key fob.

You can change the battery by getting rid of the mechanical latch on the back of the fob (see the image below). Then, gently pry out the the battery holder near the switch, and remove the old coin cell battery. Insert a new #CR2032 3-volt battery into the fob with the "+ side" facing the cover at the rear and the " side" facing down towards the rubber buttons.

Water Damage

The key fob isn't waterproof even though it's got rubber seals that prevent water from getting into the electronic chip. A splash of rain or washing cycle is likely to be okay, but submerging the key fob in ocean or pool water could cause damage to it.

The key fob needs to be reset if it is exposed to water. This process can be done by following the directions in the owner's manual, or by taking it to an auto locksmith professional or a Fiat dealer.

A fob that's out of range could stop working. Key fobs generally have a range of around 30 feet, and if they're too far from your car, they won't recognize them. To begin with, try getting closer to your vehicle. If it doesn't work, the key fob battery might require replacement. You can find replacement battery instructions for most vehicles on YouTube or in the owner's manual. This is the perfect time to consider getting a replacement key fob in case yours is starting to look scruffy and scratched.

Faulty Receiver Module

Fiat's more modern models do not require the use of a physical key to start or open the car. The cars are equipped with a remote control that sends an encrypted wireless signal to the car in order to switch the engine off and on. Locksmiths can repair the broken keyfob. Let the professionals and save time and money. They can also program the new key for your Fiat.

If you're looking to purchase an extra key for your Fiat vehicle, you'll need to give the locksmith some information about your car on the phone. You will need to give the locksmith information about your car, like the year it was manufactured and the model. This is important as locksmiths require it to ensure that the new key is compatible with the locks in place.

Not all locksmiths can create replacement Fiat panda key keys for Fiat automobiles. Look for a locksmith with a good track record and expertise in the field. This means that you are sure that the new key will work with your car and you won't waste money.

Keys that are unpaired

If you have a key fob which has isn't working, the most frequent reason is an unresponsive coin battery. The key fob has clips of metal that keep the button cell in place and complete the circuit, so when these are worn or loosened, it can result in contact issues and no power. Replace the battery with a fresh one of the same voltage, size and specification, or a spare.

It is important to dry out the key fob in case it was submerged in liquid. This can be done with isopropyl or an electronic cleaner. It is also advisable to remove the battery and clean the circuit board prior to replacing it.

If you're unable find a spare key your best option is to contact locksmith. A locksmith with the ability to reprogram Fiat transponder keys is able to do this without needing to look at the original keys. This is a less costly and faster solution than waiting for an authentic Fiat key to arrive from Italy. A professional locksmith is equipped with all the tools and equipment required to replace your key as swiftly as is feasible.