Ghost Immobiliser 2

Secures your vehicle from key cloning, and stops thieves from driving your vehicle with original keys. Our most recent immobiliser connects to your vehicles data network via CAN and an individual PIN code has to be entered in order for the engine to start.

Ghost, unlike trackers, doesn't emit radio frequency signals, and therefore cannot be detected by diagnostic tools. Ghost does not have LED indicators or buttons that would signal its presence in your vehicle or van.

Anti-key Cloning

The Ghost immobiliser was created to stop key cloning. This device is connected to your vehicle's CAN data network and creates a unique pin number using the factory buttons in your dashboard and steering. This prevents the thief from being able to start your car. If the incorrect PIN is entered, it will stop the engine from starting which makes it impossible for you to drive away with joy and pride.

bmw m4 ghost installer immobilisers are new technology that is extremely difficult for thieves to beat. In contrast to physical deterrents such as wheel locks and steering locks that can be cut off or stolen the ghost immobiliser is a discreet electronic device that isn't easily detected by regular thieves, as it doesn't emit radio signals and operates in a silent manner.

The next-generation immobiliser protects your car from a variety of threats, including key hacking relay attacks, key-hacking, and duplicate copies. It can also stop thieves from stealing keys or replacing your ECU because it won't permit them to start the car without first entering the correct PIN code.

Contrary to other immobilisers, the ghost immobiliser 2 does NOT require a remote or key fobs for operation. It can be turned off by the driver's smartphone by using a simple app. This is ideal for the times you need to hand your car over for valet parking or servicing without the key fobs.

The Autowatch Ghost-II is the latest version of our revolutionary ghost immobiliser. It is designed to be as easy and user-friendly as possible, but remains as secure as ever. This is achieved by connecting the Ghost-II with the vehicle's CAN data network. This means that there aren't any wires that can be hidden or easily spotted. It also has an inbuilt feature that lets you to disarm your Ghost-II by connecting it to the vehicle's Bluetooth and you'll be able to get in and drive, with no hassle.

OBD port hacking

OBD port hacking has become the latest technique used by professional car thieves. Thieves are able to access your vehicle's OBD port with nothing more than an laptop, an app, and a few cables that can be bought online for under PS50. Once they have access, they are able to do anything they want, from resetting your vehicle's fault codes, tuning your car, or even taking it away in under a minute.

If you have a Ghost immobiliser installed, it will stop your car being stolen with this method by requiring that a unique PIN code sequence is entered into your key fob to start the engine and then drive away. It communicates with the vehicle's ECU (Engine Control Unit) via the CAN Data Circuit. It is not detected by any scanners for RF or code grabbing. It has a Service/Valet Mode that allows your vehicle to start without the PIN code.

To use an OBD hacking device, you'll must have a laptop with software capable of reading the OBD protocol. These can be bought for less than PS100 on eBay or Amazon. You will also need an OBD cable that has OBD pins which are connected to the CAN bus. These are available on eBay and Amazon for around PS50. The cable must be spliced into the wiring harness of your car, like the radio wiring harness.

Once the hacker gains access to the OBD port on your vehicle, they will send diagnostics to the system at a high baud rate, which will crash the car's CAN and prevent the systems from working. This can cause your car's engine to stall or even stop working.

There is no need for additional remotes or key fobs

The car immobiliser is a great piece of anti-theft technology utilized by millions of modern vehicles all over the world. An aftermarket immobiliser protects your vehicle by using engine ECU software that stops cars from starting if an untrue transponder signal is sent.

It is possible for a criminal, if they have the code to disable an immobiliser, to bypass it. The batteries in the majority of key fobs is easily removed by removing it which means that a burglar could use a simple tool to remove the immobiliser's inner circuit board and replace it with the blank. Then, they will be able to start your vehicle.

The TASSA approved Ghost 2 is an immobiliser that does not require any additional keys or remotes. The immobiliser connects directly to the vehicle's ECU (Engine Control Unit). This is done through a discrete, silent data loop in the CAN which cannot be detected by diagnostic tools such as the ones used by high-tech thieves. It does not also use a traditional key-fob with LED indicators, which means it's not visible in plain sight.

There will be instances that you must deactivate Autowatch Ghost 2's automatic security for instance, during a valet parking or servicing. The ghost CAN immobiliser has a dedicated mode for this, referred to as 'Service Mode' which can be activated with just pressing a button on your phone. The car can still be operated, but the maximum speed is limited to 36mph.

Contact us today to set up an appointment to see our workshop. A member of our team will explain how the system works and will give you a Ghost 2 emergency card, installation certificate, and security assurance.

Simple change of PIN code

Ghost is a next generation device that can secure your vehicle without cutting wires or adding aftermarket key fobs. It is directly connected to the vehicles CAN data network and a personalised PIN code is programmed in it via buttons on your steering wheel & dash. The device does not emit RF signals, therefore it cannot be bypassed. This makes it impossible to detect by sophisticated scans of RF and code-grabbing techniques that are used by modern thieves.

The PIN code can be changed to block earlier drivers or include an override code in case you forget the sequence. During installation, the installer will demonstrate how to do this. The system comes with a valet-mode feature that can be used to temporarily disable pin input sequences, so that your garage or mechanic can work on the vehicle without knowing the pin number. This is ideal for those who wish to surrender their vehicle for valet parking or service but don't want to divulge the PIN sequence.

range rover evoque ghost installer is an unobtrusive system that utilizes the buttons on your car to create an unique and interchangeable PIN sequence. This sequence is entered through the smartphone app. No additional LED indicators are used, and your vehicle is protected without possibility of being disabled.

Tested for each vehicle

Ghost immobilisers, unlike key fobs that require pressing buttons, is discretely installed under the dash or on the steering wheel. It is not obvious that it's there. The device is connected to your car's CAN data networks and a personalised PIN code is programmed into it using buttons that are already present on your car. The system won't permit your car to start until the code is entered. This means that thieves cannot clone your car's existing keys or gain access to the OBD port to hack your vehicle.

Ghost is a feature that can be found in any vehicle, including electric vehicles, motorhomes, vans and bikes. It's also extremely versatile and can be set to deactivate in a variety of situations. It is possible to program it to go into Valet mode, for example when your vehicle is taken to a valet service or parking company. This means that your car can be operated within a pre-determined 30mph speed limit and the ghost immobiliser will reactivate itself when it is returned to your property.

Another fantastic feature is that the device can be reset to the personalized PIN at any time. This is a great option if you lose the code or when the device ceases to function.

It's also important to note that the device is undetectable to anyone who isn't familiar with it. It does this by analyzing the buttons on your steering wheel and dashboard and then using the information it sends to determine the exact button that was hit. This makes it a safe and solid security system that is not able to be manipulated through RF scanning or jamming, or even a door lock pick set.