Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as aluminum or timber.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good condition.

For single pane windows, it can be relatively simple to replace them, and the new window is usually able to fit into the frame that was previously installed easily. If windows with double glazing repair panes are held together by internal beading, it will be difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not onto the floor, where they could be trampled under.

Once the glass is removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and fix the window. It also acts as an obstacle to stop intruders from making their way into your home. If the gap between the door and the window is significant, you may want to use a security screen that also includes an opening. This will give you the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. As time passes, they may be affected by a variety of issues such as sagging. A sagging uPVC windows can cause problems with light, draughts and even security. It's crucial to act when you discover that your uPVC windows are sagging.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll have to open the window to get to the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you have moved your hinges. If you're satisfied with the fit of your window, tighten the screws to secure them in the right position.

If you can't reposition the hinges you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to lose their tightness. It is crucial to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles can also become loose. Most often this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. You'll first need to close the window and then perform an experiment fitting. The corner joints of the sash must align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if wake up every morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how severe the issue is, the old caulking may need to be removed. When it comes to uPVC repair, you must avoid over-caulking. This will make your window more difficult to clean and decrease its energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more severe situations, upvc repair you may have to replace the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double glazing-glazed window, it is more likely that the problem is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with ease, it may be hinges that are at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It's easy to replace a hinge on a window however it is easier if someone helps hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. This can be done by checking for the arrows on each hinge. This indicates which way the window should be opened.

The issue can be caused by opening the window incorrectly or a faulty installation in the factory. Sending us photos through our website can often solve the issue. We are more than happy to give advice.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is a good way to do this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It also decreases the possibility of a window sticking and prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges, also because of wear and tear, can become misaligned, this will cause a gap to form between the sash and the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge of the window, can also be misaligned, and again it is possible to just give them a good clean, but in some cases it might be necessary to have these replaced.

The seals may wear out or get damaged over time, allowing air escape. Installing high-quality weatherstripping can help prevent draughts. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures, and reduce draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be placed over your window sill. They can keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair your windows made of upvc will continue to provide excellent security and insulation for your home. It is essential to remember that all windows will eventually become worn out, and it may be more cost-effective to replace them instead of fixing them. If you have any problems with your window made of upvc it is recommended to speak with a professional as soon as possible.