Double Glazed Window Repair

Double glazing is an excellent energy efficient investment that prevents loss of heat in winter months and helps keep your home cooler during the summer. Having your double glazed windows repaired when needed is an excellent method to ensure they are operating properly.

Over time, your double-glazed windows may suffer from issues such as condensation and misting. Double glazed windows may be difficult to open and close.

Broken Panes

A stray baseball or a flying pebble from your lawnmowers, or even a severe storm could break the double panes of your windows and expose your home to the elements. While a damaged window may be difficult to repair, you don't have to replace it completely. The insulated glass between two glass panes is in good condition, so you can repair your double-paned window yourself.

First, you'll need to take any broken glass from the frame. Be careful to keep glass shards from falling to the floor or falling off the frame. Wear work gloves to protect you hands, and a rag to cover the broken glass to avoid further cuts or damage. After removing the broken pane, carefully clean the entire frame of the window to get rid of any remaining sealant and debris. It is important to smooth rough areas of the frame to ensure an even surface for the new glazing.

After cleaning the frame after cleaning, you can apply a second layer of glass to the area where you removed the broken pane. This is the most effective way to keep your window safe and sealed, and it will aid in reducing energy costs by keeping water and drafts from entering your home. The next step is to choose your glazing material. There are several options such as clear tape, which is more durable than regular tape and prevents further cracking of your window, or glazing film, which is similar to clear plastic wrapping. The benefit of this option is that it can be painted to match the frame you have and will keep snow and rain out as well.

No matter what material you choose, it's important to press the glaziers points into that gap where the putty meets your frame. These will hold the newly-formed glass in place and assist it to adhere to the frame. Glazier's points can be found in hardware stores, and they are available in pre-made ropes which you roll out onto the frame rabbets.

Condensation

Double glazing is susceptible to condensation issues. If you encounter this issue, it is recommended to contact the company that provided the window. Many companies offer warranties and guarantees to provide coverage for these problems. Condensation or Upvc Window repairs fogging between the panes of your windows is a sign that your seals are damaged. Only a professional can resolve this problem by replacing both panes.

This procedure is a bit difficult and requires the use of special tools to take off the old pane and then install the new one, however it is possible to do this by an expert who will provide the necessary equipment. Making use of these tools can be dangerous, however it is best to leave this kind of job to a professional.

Wear safety gloves and glasses if choose to do it yourself. You may be exposed to flying glass fragments. It is important to remove any putty or metal glazing points from the grooves that will receive the new window. You should also brush the frame with wire and vacuum or wipe with a damp cloth. After the frame is dry you'll have to purchase an additional piece of glass that is 1/8" shorter in both directions than the existing upvc window repair. Make sure the glass fits into the grooves.

You will require a layer of silicone caulk into the grooves of frames to ensure the glass you are installing is properly installed. After the caulk dries and is dry, you must smooth it and make any adjustments needed. The wood molding will then be put back in place.

Double glazed windows can become difficult to open or close when the weather is extremely changing. Extreme temperatures may cause the frames of double-glazed windows to expand or contract, causing them to become sagging and stick. If this is the case, you can try wiping down the frames with water and lubricating the joints. However, it might be best to contact the company that installed your windows for assistance.

Misted

Misted Double Glazing is a window issue that is caused by moisture getting trapped between the glass panes of your double-glazed windows. Double glazing is made up of two panes which are separated by a space filled with argon to improve thermal efficiency. This creates an airtight seal that keeps warm air inside and cold outdoor air outside and allows you to keep the temperature comfortable in your home.

The seal could be damaged over time, and water can accumulate between the panes of glass and cause them to become misty. This happens because the space between the panes is heated by the sun, which causes water vapour to build up in it.

This is a natural occurrence, but if it occurs between the panes of the window it can be a problem because it won't be able to control the temperature in the room. Instead, the temperature outside the window will influence the temperature indoors. Northfield Glass can help you when your double-glazed windows begin to fog.

We can replace the blown sealed unit without needing to replace the entire window and is less disruptive than a full replacement. Our misty glass repair consists of removing and cleaning the unit of glass, then replacing it with a brand new one. This will result in a seal that is watertight and will be watertight.

There are some companies in the industry that claim to drill holes into your existing misted windows and inject chemicals into them, which they claim will eliminate the fog & condensation however, we don't recommend this method. This is not just unsightly, but it could cause damage to the toughened glass and can result in windows that don't fully function.

If you don't take care to fix the issue immediately, it could lead to mould, which can not only harm the window, but also cause health risks for your loved ones. The moisture in the window may also lead to other problems with your property like damp or rot. In some instances it might be necessary to replace the entire window.

Failed or Blown

Double-glazed windows are made up of two panes of glass with an inert or air between them. This helps to improve their thermal efficiency, keeping heat in and cold out. Over time, the gas may depressurize which can lead to a range of issues.

Condensation in between the panes is one of the most common. While it is a natural phenomenon, it doesn't mean your window is damaged but it could be a sign that you need to seal your windows. Condensation is also an indication of broken double glazing, which could require a re-installation.

Double-glazed windows can also cause drafts. This could be because of a failed seal, a broken handle, or a damaged lock. A draught is obvious and result in more expensive heating bills, so it is important to get it fixed sooner rather than later. You can test the seals by rubbing around the edges of your window frame to see if you feel any cold air.

Another indication that your window seals have failed is when you begin to notice water beads on the inside of your windows. This is an indication that you need to replace the seals on your double-glazed windows.

Your window frames are made to move a bit, as they need to do in order to keep the glass sheets in the right place. However, with time, this special packaging material may become compacted and this will crack the crucial seal. This will allow air to flow between the panes and reduce the efficiency of your window.

A blown seal is an obvious sign that your double glazing has failed and should be repaired immediately. A blown seal stops your double glazing from performing its primary purpose, which is to keep cold air out and warm air in. A damaged seal could let moisture into your home, which can lead to mold and other unpleasant conditions. Contact a double glazing expert when you spot a damaged window seal. They can repair or replace the entire unit.