Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as timber and aluminum.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good condition.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the old frame very easily. If you have double-paned windows that are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance you'll need locate some plastic spacers that assist the new pane to fit perfectly into the window frame.

If you plan attempt to remove the glass panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor, where they could be trampled.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to block drafts and water from entering the home until a professional comes out and fix the window. It also acts as a barrier, preventing any intruders from getting access to your home. If the gap is particularly large, you may want to consider using the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they can suffer from a variety of issues, including sagging. A sagging uPVC windows can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need open the window to access the frame. After that, using the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close the window and check for an appropriate fit. If you're happy with the fit, you can tighten the screws to ensure they stay in position.

If you aren't able to move the hinges, you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to lose their tightness. It is important to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. Often this is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close your window and do a test fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it's important to take action. Windows that leak water do are not just a cause for destruction of your home's structure but also hamper your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the problem the caulking used previously may require removal before a new layer of caulk can be applied. It is crucial to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area harder to clean and can reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, Window Repairs you might have to consider replacing the window repairs near me.

Moldy sills and rotten ones are another sign of water leakage. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the problem is with the seal rather than the frame. Again this can easily be corrected by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease it could be hinges at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like any mechanical component hinges will be damaged over time. It is very easy to change a window hinge, but it's easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. This can be done by looking for the arrow on each hinge, this shows which way the window should be opened.

The issue can be caused either by opening the window improperly or a faulty installation in the factory. Sending us photos via our website will often resolve the problem. We are always happy to give suggestions.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It also decreases the chance of windows sticking and help prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. First, the hinges because of wear and tear, could become misaligned. This causes gaps to develop where the sash meets the frame. This can be easily repaired by giving them good clean, but if they are beyond repair it may be necessary to have them aligned or replaced. The interlock, which is located on the hinge of the window, can also be misaligned, and again it may be possible to give them a clean but in some cases it might be necessary to get them replaced.

The next common reason for draughts are the window seals. These can become worn down or damaged over time and allow air to escape through these gaps. Installing high-quality weatherstripping can help keep draughts at bay. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures, and also reduce the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it may be cheaper to replace them rather than repair them. If you have any problems with your upvc window, it's best to consult a professional as soon as you can.