Double Glazing Door Lock Repairs

Is your uPVC door or window mechanism faulty? Maybe the window or door handles aren't aligned properly or are difficult to use.

It is essential that the double glazed doors operate smoothly, otherwise you'll lose energy and increase the chance of burglary. Owen the Locksmith can repair your door lock for a reasonable price.

Snapped Key

When a key snaps off within the lock, it can be incredibly difficult. It can also be a security issue, as it may leave you vulnerable to an intruder if the door does not lock. Fortunately, there are some simple fixes you can try to resolve the issue and get your door operating correctly.

Keep calm. If you panic you may end up pushing the damaged key piece further into the lock.

Spray WD-40 or another penetrating oil, into the lock. This will assist the broken piece come out more easily. You can also use the screwdriver to break off any pieces stuck. If you have a chunk of the key that is stuck then grab it using a paperclip or other thin metal object and pull it. Both of these methods work, but be careful not to push the broken piece of the key further into the keyway.

Some paperclips have grooved edges that can work in a pinch to extract hooks and some Jigsaw blades can also be used for this use. If you don't have any of them handy, you can make use of needle-nose pliers to bend them and create hooks. Finally, a pair of tweezers can be used to grasp and pull out the last piece of the key that was broken.

If you can't get the broken piece of the key out, try using a lock de-icer. It's available at most hardware stores and is used to freeze any moisture that may be present in the lock.

If none of these solutions work, it could be time to call a locksmith. Fitlocks experts can solve problems like broken handles and broken keys with uPVC locks and door mechanisms. They can also alter the double glazing door mechanisms to ensure that they are easier to use. Request a repair for your double glazing with us online or give us a phone call to discuss your requirements.

Broken Cylinder

A damaged cylinder can pose an immediate security risk. A professional locksmith can easily repair the cylinder. To fix the cylinder, a locksmith will need to tap it. They can do this using a hammer or other tool, but the most efficient way is to employ an extended match or piece of wire. Then, position the match's end or wire near the keyway. The locksmith will then strike the lock in order to crack it. This is far better than using a hammer, which could cause damage to the lock.

The most frequent cause for cracks in the head of a cylinder is due to overheating. This can happen when the block and cylinder head are made of different metals like cast-iron and aluminum. Different metals can heat up and cool down at different rates. This can cause localised hotspots to expand more quickly than the rest of the cylinder.

Corrosion is a different reason for cylinder fractures. If the cylinder block and upvc door repairs near me head are not maintained correctly they could corrosion or rust, which can cause them to expand more than they would normally. Over time, this can also cause cracks.

If your uPVC window or door lock is rigid and requires a lot more pressure to turn it could be due to a variety reasons. A faulty locking mechanism, misalignment, or the wear of the handle are typical causes of this issue.

It is a quick and cost-effective fix that a majority of double glazing owners can do. A professional locksmith is able to solve the issue within one hour of arriving at your property. Depending on your needs they can change the locking mechanism, replace the window handles, and change the gearboxes. A skilled locksmith will always be able to advise you of the most cost-effective option for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders, which provide an additional layer of protection from burglars. It is a small cost to get the peace of mind that comes from knowing your Upvc Door Repairs Near Me door is secure.

Broken Handle

Window handle locks are complex mechanisms that become less effective as time passes and use, so it's not a surprise they occasionally break. If yours is damaged it's difficult to pinpoint the cause of the issue and make sure you fix it properly.

Repairing your damaged handle, whether it's the internal latch or locking mechanism, will improve the security of your uPVC door and prevent draughts. Incorrectly repairing or replacing the handle could be expensive and can damage the door's frame and lock It is therefore worth taking some time to make sure you do it right.

Screwdriver Open the window and the screw loose, loosen the handle. It should be located on the inside face of the back plate, normally hidden by an attractive cover for the screw for aesthetic reasons. Be sure to not lose any of the internal parts within the handle, such as the levers or plates on the opposite side of the spindle. It is best to keep them in the same order so you can re-install them when needed.

Then, using an additional screwdriver take the screw off that connects the handle with the spindle in the back. Once the screw is free, you can remove the handle and take the broken spindle out. Replace it with a new one, making sure it's the same size as the old one (you can usually find these on the internet or in hardware stores) and screw it securely in the correct position. Don't over tighten the screw as this could cause damage to the handle and window frame.

Close the handle and try it. The hope is that it will function smoothly and you'll be able open your window repair once more.

While you're working on the handle, don't forget to ensure that your uPVC windows are shut correctly. If they're not closing properly then you may experience damp and draughts in your home, as in addition to compromising your home's energy efficiency. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames so they are able to shut properly.

Broken Spindle

It is more typical for the spindle to break than the handle. This is most frequent in uPVC tilt and turn windows. These windows require a handle that operates an electronic locking mechanism within the window frame. The handle is attached to a centre rod that triggers a set of cams that look like mushrooms, they lock into window frame keeps. If the dead latch mechanism fails to open after the handle is turned, it is likely the spindle has been damaged. This could be a frustrating issue.

Fortunately, there are steps that can be taken to rectify this issue. A reputable locksmith can swiftly and efficiently solve the issue. They will be able to remove the window handle using a tool to remove the wheel part of the mechanism that is where the spindle is. This is done without damage to the handle or the window frame.

After removing the wheel, the technician can inspect the spindle and identify the cause of the break. This involves disassembling the spindle and inspecting each component, noting any damage or excessive wear. This procedure is usually performed in a clean room by skilled technicians.

The next step is to clean the damaged spindle, this helps eliminate any dirt or other debris that might be hindering its normal operation. The spindle may then be repaired or replaced. If it is being replaced the technician could use the dowel that is similar in size to the one used in the first and drill mating holes in both pieces of the spindle. This will ensure that the spindle fits perfectly with the handle.

If the spindle that is damaged is beyond repair, it may be required to replace it completely. Home centres sell generic replacements. However, If the style of your window is unique then you will need to find a woodworker or cabinet maker who can replicate the exact part for you. Once the spindle has been installed, it can be connected to the handle. The screw holes on the handle to the existing screws in the frame. Once the new handle is firmly installed, you are now ready to operate your uPVC window.