UPVC Window Handle Replacement

It's easy to replace a broken window handle with the right tools. It is important to know the type of handle you have and the spindle's size before purchasing an alternative.

Older uPVC windows use cockspur handles for windows. They have a spur that protrudes to the lock of a wedge cockspur striker plate. These can be either left or right-handed and need to be matched when replacing.

What type of lock or handle do you have? I have

There are many different types of window screen replacement handles made from upvc and locks, each with its particular advantages and uses. The kind of handle you choose will determine the ease to open your windows and if the locking mechanism works according to the plan. Over time and through regular use, window handles made of upvc are prone to wear or damage. out, upvc window handle replacement making them less secure and effective. In some instances, they could even fall off completely. If you find that your window handles have been removed, it's important to fix them as soon as possible. This will prevent possible break-ins and ensure that your home is secure.

The good news is that replacing your upvc window handles is a fairly simple job that can be completed by almost anyone. With just a few tools and the right knowledge it's a straightforward procedure that shouldn't take longer than a couple of minutes. You will need to know the kind of handle or lock that you have on your window. This will help you select the correct replacement.

Inline Espagnolette Handles

These are the most common type of upvc handles and are usually located on the outside of your window. They have a flat design and come with a latch that connects to the locking mechanism on the frame of the window when it is turned. Inline upvc handles also come with a spindle that goes through the middle of the handle and then into the window frame to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames and feature an unusual hook-shaped design. Cockspur handles are fitted with a single screw that holds the handle to the frame of the window and aren't as secure as other types of window handles.

Handles that tilt and turn

Unlike the other handles made of upvc the tilt and turn handles can be turned to open the window and turned inwards to allow to allow ventilation. They typically have a 7mm spindle on the back of the handle. They are available in left and right-handed versions.

When buying replacement windows prices upvc handles it is essential to verify the length of the spindle as not all are identical in size. Drop something into the middle of the hole to measure the length. This is the length of the spindle that will fit your window.

What is the spindle?

uPVC window handles function similarly as doors. By turning the handle, you are able to activate a latch inside the frame. The window is then opened and shut. The handles could be damaged, especially if they're used frequently or exposed to harsh conditions. You may have to replace the handles on your uPVC window if they are not operating properly.

There are a variety of uPVC handle options, including Espag, Cockspur, and Spaded handles. These handles are designed to fit in the uPVC frames in different ways and each handle type uses a specific spindle to lock the mechanism to the window. It is important to identify the type of handle installed on your uPVC windows to ensure that you replace it with the right one.

You can check what type of uPVC handle you are using by looking at the base section of your handle. There should be a "snap-in cover over one screw that holds the handle's base in place. Take it off and you should be able see the second screw on the opposite side of the base of the handle. Once both screws are removed you should be capable of pulling the handle away from the uPVC window.

After taking off the uPVC handle, remove it from the locking mechanism. Make note of the length of the spindle as you'll need to ensure that you buy an alternative that is the same length as the original handle and locking mechanism.

The spindle wears down and cannot operate the locking mechanism. This can be due to damage from constant use, a loosening of the locking mechanism, or even corrosion that occurs over time. If this happens, you will have to replace both the window handle and locking mechanism to restore the full functionality of your uPVC Windows.

How do I take off my old handle?

In the course of time and daily use, window handles can be damaged or destroyed, and if this happens it is important to repair them as quickly as possible to ensure the safety of your home. Fortunately, replacing a worn or damaged handle is a easy task that can be accomplished in less than one minute and doesn't require any specialized tools.

The first step in removing the handle that was previously used is to remove the screw located on the top of the base of the handle. Once this is removed the handle can be removed from the base section. There will be another screw located at the bottom of the handle's base, and it is able to be removed as well. Once both of these screws are removed the handle can be completely detached from the base portion of the window.

After removing the old handle and align the fixing holes of the new handle with the holes that are already in the window frame. There may be a little sticker or caps on the new handle, so remove them if needed and then put the handle in the frame. It is crucial to verify that the handle works once it is put in place. Turn the handle around and make sure that the lock mechanism is activated.

Espag handles come with spindles that extend out of the handle and slots into the multipoint locking mechanism on the frame of the window. Cadenza windows have a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and are hung over the frame that surrounds the window or the transom bar crossmember.

After you have installed the new handle, slide the spindle inside the window lock and tighten it. When the handle is fixed in place, replace the'snap in' cover and screw cap (if appropriate). Once the handle is ready to use, you can open and close the window a few times to make sure it is working properly and securely.

How do I install the new handle?

It's not that difficult to change the handle on your windows made of uPVC. The process is very simple. You'll need a screwdriver and a little bit of patience. First, make sure the handle that you are replacing is unlocked. Then, remove any screws that are visible. You can also replace them with screw caps. After removing the handle, you need to make an note of the length of the spindle which protrudes from the back of the handle. This is important as it will determine the kind of handle you'll need to buy.

Espagnolette handles that are made of uPVC are the most sought-after type of handle. They feature a spindle that runs through the handle and operates a locking mechanism inside the window frame. The handle releases the latch and allows the window to open. During regular use and time, handles for espagnolette may become damaged.

Cadenza handles are another type of uPVC window handle that is commonly used on tilt and turn windows. They have an extended blade that works a multipoint locking mechanism within the window. They are usually more secure than espagnolette handles since they are only accessible from the inside. They can be replaced by the same procedure as espagnolette handles however you will need to ensure that the new handle has an angled blade as opposed to a flat one.

Once you have selected the correct handle, simply align the new handle with the existing screw holes before fixing it with screws. Then, you should put the screw covers on and test the new handle. You can perform this by dragging the handle between the locked position to the unlocked one several times. It may be worth contacting an expert to see how you can fix any issues. They are often able to advise you on the best solution to solve the issue in a quick and effective way.